BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Chuck Bender - Woodworking - ECPv6.16.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Chuck Bender - Woodworking
X-ORIGINAL-URL:https://acanthus.com
X-WR-CALDESC:Events for Chuck Bender - Woodworking
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260823T080000
DTEND;TZID=America/New_York:20260823T170000
DTSTAMP:20260613T003215
CREATED:20260609T115105Z
LAST-MODIFIED:20260609T115105Z
UID:10002069-1787472000-1787504400@acanthus.com
SUMMARY:Build a Federal Style Hepplewhite Side Table with Bob Van Dyke – Hands-on Class
DESCRIPTION:This exciting new class features a small walnut Federal Style Hepplewhite side table with a whole lot of challenges and a boatload of new skills to be learned. The focus of this class will be efficiency in joinery\, ornamentation\, and design. Efficiency in joinery means completing as much joinery as possible in as few operations as practical\, along with cutting joints that fit right off the machines. The ornamentation is simple\, classic Federal style. String inlay on the legs\, a patterned waist banding setting off the aprons\, and a veneered & cockbeaded dovetailed drawer.  This project also features techniques that may be new to some of you. Planing a spring joint when making the top\, book-matching the crotch walnut or walnut burl veneer for the drawer front\, making dovetails efficiently and accurately\, and learning to cut twin tenons on the drawer blade are all skills that make what is basically a simple table into an heirloom piece you can be proud of. This traditional Federal table will fit with just about any home décor and is small enough at 22” wide X 17” inches deep to fit just about anywhere. These are skills you will use over and over.
URL:https://acanthus.com/event/build-a-federal-style-hepplewhite-side-table-with-bob-van-dyke-hands-on-class/2026-08-23/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260824T080000
DTEND;TZID=America/New_York:20260824T170000
DTSTAMP:20260613T003215
CREATED:20260609T115105Z
LAST-MODIFIED:20260609T115105Z
UID:10002070-1787558400-1787590800@acanthus.com
SUMMARY:Build a Federal Style Hepplewhite Side Table with Bob Van Dyke – Hands-on Class
DESCRIPTION:This exciting new class features a small walnut Federal Style Hepplewhite side table with a whole lot of challenges and a boatload of new skills to be learned. The focus of this class will be efficiency in joinery\, ornamentation\, and design. Efficiency in joinery means completing as much joinery as possible in as few operations as practical\, along with cutting joints that fit right off the machines. The ornamentation is simple\, classic Federal style. String inlay on the legs\, a patterned waist banding setting off the aprons\, and a veneered & cockbeaded dovetailed drawer.  This project also features techniques that may be new to some of you. Planing a spring joint when making the top\, book-matching the crotch walnut or walnut burl veneer for the drawer front\, making dovetails efficiently and accurately\, and learning to cut twin tenons on the drawer blade are all skills that make what is basically a simple table into an heirloom piece you can be proud of. This traditional Federal table will fit with just about any home décor and is small enough at 22” wide X 17” inches deep to fit just about anywhere. These are skills you will use over and over.
URL:https://acanthus.com/event/build-a-federal-style-hepplewhite-side-table-with-bob-van-dyke-hands-on-class/2026-08-24/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260825T080000
DTEND;TZID=America/New_York:20260825T170000
DTSTAMP:20260613T003215
CREATED:20260609T115105Z
LAST-MODIFIED:20260609T115105Z
UID:10002071-1787644800-1787677200@acanthus.com
SUMMARY:Build a Federal Style Hepplewhite Side Table with Bob Van Dyke – Hands-on Class
DESCRIPTION:This exciting new class features a small walnut Federal Style Hepplewhite side table with a whole lot of challenges and a boatload of new skills to be learned. The focus of this class will be efficiency in joinery\, ornamentation\, and design. Efficiency in joinery means completing as much joinery as possible in as few operations as practical\, along with cutting joints that fit right off the machines. The ornamentation is simple\, classic Federal style. String inlay on the legs\, a patterned waist banding setting off the aprons\, and a veneered & cockbeaded dovetailed drawer.  This project also features techniques that may be new to some of you. Planing a spring joint when making the top\, book-matching the crotch walnut or walnut burl veneer for the drawer front\, making dovetails efficiently and accurately\, and learning to cut twin tenons on the drawer blade are all skills that make what is basically a simple table into an heirloom piece you can be proud of. This traditional Federal table will fit with just about any home décor and is small enough at 22” wide X 17” inches deep to fit just about anywhere. These are skills you will use over and over.
URL:https://acanthus.com/event/build-a-federal-style-hepplewhite-side-table-with-bob-van-dyke-hands-on-class/2026-08-25/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260826T080000
DTEND;TZID=America/New_York:20260826T170000
DTSTAMP:20260613T003215
CREATED:20260609T115105Z
LAST-MODIFIED:20260609T115105Z
UID:10002072-1787731200-1787763600@acanthus.com
SUMMARY:Build a Federal Style Hepplewhite Side Table with Bob Van Dyke – Hands-on Class
DESCRIPTION:This exciting new class features a small walnut Federal Style Hepplewhite side table with a whole lot of challenges and a boatload of new skills to be learned. The focus of this class will be efficiency in joinery\, ornamentation\, and design. Efficiency in joinery means completing as much joinery as possible in as few operations as practical\, along with cutting joints that fit right off the machines. The ornamentation is simple\, classic Federal style. String inlay on the legs\, a patterned waist banding setting off the aprons\, and a veneered & cockbeaded dovetailed drawer.  This project also features techniques that may be new to some of you. Planing a spring joint when making the top\, book-matching the crotch walnut or walnut burl veneer for the drawer front\, making dovetails efficiently and accurately\, and learning to cut twin tenons on the drawer blade are all skills that make what is basically a simple table into an heirloom piece you can be proud of. This traditional Federal table will fit with just about any home décor and is small enough at 22” wide X 17” inches deep to fit just about anywhere. These are skills you will use over and over.
URL:https://acanthus.com/event/build-a-federal-style-hepplewhite-side-table-with-bob-van-dyke-hands-on-class/2026-08-26/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260827T080000
DTEND;TZID=America/New_York:20260827T170000
DTSTAMP:20260613T003215
CREATED:20260609T115105Z
LAST-MODIFIED:20260609T115105Z
UID:10002073-1787817600-1787850000@acanthus.com
SUMMARY:Build a Federal Style Hepplewhite Side Table with Bob Van Dyke – Hands-on Class
DESCRIPTION:This exciting new class features a small walnut Federal Style Hepplewhite side table with a whole lot of challenges and a boatload of new skills to be learned. The focus of this class will be efficiency in joinery\, ornamentation\, and design. Efficiency in joinery means completing as much joinery as possible in as few operations as practical\, along with cutting joints that fit right off the machines. The ornamentation is simple\, classic Federal style. String inlay on the legs\, a patterned waist banding setting off the aprons\, and a veneered & cockbeaded dovetailed drawer.  This project also features techniques that may be new to some of you. Planing a spring joint when making the top\, book-matching the crotch walnut or walnut burl veneer for the drawer front\, making dovetails efficiently and accurately\, and learning to cut twin tenons on the drawer blade are all skills that make what is basically a simple table into an heirloom piece you can be proud of. This traditional Federal table will fit with just about any home décor and is small enough at 22” wide X 17” inches deep to fit just about anywhere. These are skills you will use over and over.
URL:https://acanthus.com/event/build-a-federal-style-hepplewhite-side-table-with-bob-van-dyke-hands-on-class/2026-08-27/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260828T080000
DTEND;TZID=America/New_York:20260828T170000
DTSTAMP:20260613T003215
CREATED:20260609T115105Z
LAST-MODIFIED:20260609T115105Z
UID:10002074-1787904000-1787936400@acanthus.com
SUMMARY:Build a Federal Style Hepplewhite Side Table with Bob Van Dyke – Hands-on Class
DESCRIPTION:This exciting new class features a small walnut Federal Style Hepplewhite side table with a whole lot of challenges and a boatload of new skills to be learned. The focus of this class will be efficiency in joinery\, ornamentation\, and design. Efficiency in joinery means completing as much joinery as possible in as few operations as practical\, along with cutting joints that fit right off the machines. The ornamentation is simple\, classic Federal style. String inlay on the legs\, a patterned waist banding setting off the aprons\, and a veneered & cockbeaded dovetailed drawer.  This project also features techniques that may be new to some of you. Planing a spring joint when making the top\, book-matching the crotch walnut or walnut burl veneer for the drawer front\, making dovetails efficiently and accurately\, and learning to cut twin tenons on the drawer blade are all skills that make what is basically a simple table into an heirloom piece you can be proud of. This traditional Federal table will fit with just about any home décor and is small enough at 22” wide X 17” inches deep to fit just about anywhere. These are skills you will use over and over.
URL:https://acanthus.com/event/build-a-federal-style-hepplewhite-side-table-with-bob-van-dyke-hands-on-class/2026-08-28/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
END:VCALENDAR