BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Chuck Bender - Woodworking - ECPv6.15.18//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Chuck Bender - Woodworking
X-ORIGINAL-URL:https://acanthus.com
X-WR-CALDESC:Events for Chuck Bender - Woodworking
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20200308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20201101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20210314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20211107T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20220313T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20221106T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20210809T083000
DTEND;TZID=America/New_York:20210809T163000
DTSTAMP:20260409T175817
CREATED:20201202T215823Z
LAST-MODIFIED:20201202T215823Z
UID:10000248-1628497800-1628526600@acanthus.com
SUMMARY:Build a Stickley Tile-top Tea Table – Hands-on Class
DESCRIPTION:Furniture from the Arts and Crafts period\, like this Stickley Tile-top Tea Table\, are both stylish and functional. Traditionally\, furniture of this period was made in quarter-sawn oak\, but this project would look great in just about any wood. \n  \n  \nStickley Tile-top Tea Table\nYou’ll be copying a rare example of Stickley design. While the original size is roughly 20? X 25?\, you can modify the size to suit your needs. The beauty of making a project of this kind in such a small class is room for customization. \n 
URL:https://acanthus.com/event/build-a-stickley-tile-top-tea-table/2021-08-09/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2020/11/Tile_Top_Tea_Table-1.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20210810T083000
DTEND;TZID=America/New_York:20210810T163000
DTSTAMP:20260409T175817
CREATED:20201202T215823Z
LAST-MODIFIED:20201202T215823Z
UID:10000249-1628584200-1628613000@acanthus.com
SUMMARY:Build a Stickley Tile-top Tea Table – Hands-on Class
DESCRIPTION:Furniture from the Arts and Crafts period\, like this Stickley Tile-top Tea Table\, are both stylish and functional. Traditionally\, furniture of this period was made in quarter-sawn oak\, but this project would look great in just about any wood. \n  \n  \nStickley Tile-top Tea Table\nYou’ll be copying a rare example of Stickley design. While the original size is roughly 20? X 25?\, you can modify the size to suit your needs. The beauty of making a project of this kind in such a small class is room for customization. \n 
URL:https://acanthus.com/event/build-a-stickley-tile-top-tea-table/2021-08-10/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2020/11/Tile_Top_Tea_Table-1.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20210811T083000
DTEND;TZID=America/New_York:20210811T163000
DTSTAMP:20260409T175817
CREATED:20201202T215823Z
LAST-MODIFIED:20201202T215823Z
UID:10000250-1628670600-1628699400@acanthus.com
SUMMARY:Build a Stickley Tile-top Tea Table – Hands-on Class
DESCRIPTION:Furniture from the Arts and Crafts period\, like this Stickley Tile-top Tea Table\, are both stylish and functional. Traditionally\, furniture of this period was made in quarter-sawn oak\, but this project would look great in just about any wood. \n  \n  \nStickley Tile-top Tea Table\nYou’ll be copying a rare example of Stickley design. While the original size is roughly 20? X 25?\, you can modify the size to suit your needs. The beauty of making a project of this kind in such a small class is room for customization. \n 
URL:https://acanthus.com/event/build-a-stickley-tile-top-tea-table/2021-08-11/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2020/11/Tile_Top_Tea_Table-1.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20210812T083000
DTEND;TZID=America/New_York:20210812T163000
DTSTAMP:20260409T175817
CREATED:20201202T215823Z
LAST-MODIFIED:20201202T215823Z
UID:10000251-1628757000-1628785800@acanthus.com
SUMMARY:Build a Stickley Tile-top Tea Table – Hands-on Class
DESCRIPTION:Furniture from the Arts and Crafts period\, like this Stickley Tile-top Tea Table\, are both stylish and functional. Traditionally\, furniture of this period was made in quarter-sawn oak\, but this project would look great in just about any wood. \n  \n  \nStickley Tile-top Tea Table\nYou’ll be copying a rare example of Stickley design. While the original size is roughly 20? X 25?\, you can modify the size to suit your needs. The beauty of making a project of this kind in such a small class is room for customization. \n 
URL:https://acanthus.com/event/build-a-stickley-tile-top-tea-table/2021-08-12/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2020/11/Tile_Top_Tea_Table-1.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20210813T083000
DTEND;TZID=America/New_York:20210813T163000
DTSTAMP:20260409T175817
CREATED:20201202T215823Z
LAST-MODIFIED:20201202T215823Z
UID:10000252-1628843400-1628872200@acanthus.com
SUMMARY:Build a Stickley Tile-top Tea Table – Hands-on Class
DESCRIPTION:Furniture from the Arts and Crafts period\, like this Stickley Tile-top Tea Table\, are both stylish and functional. Traditionally\, furniture of this period was made in quarter-sawn oak\, but this project would look great in just about any wood. \n  \n  \nStickley Tile-top Tea Table\nYou’ll be copying a rare example of Stickley design. While the original size is roughly 20? X 25?\, you can modify the size to suit your needs. The beauty of making a project of this kind in such a small class is room for customization. \n 
URL:https://acanthus.com/event/build-a-stickley-tile-top-tea-table/2021-08-13/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2020/11/Tile_Top_Tea_Table-1.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20210821T090000
DTEND;TZID=America/New_York:20210821T163000
DTSTAMP:20260409T175817
CREATED:20210102T125622Z
LAST-MODIFIED:20210811T160119Z
UID:10000512-1629536400-1629563400@acanthus.com
SUMMARY:3D Cutting Board With Alex Snodgrass –  Hands-on Class
DESCRIPTION:Make a 3D Cutting Board with Alex Snodgrass here in the Acanthus Workshop. Just in time for the upcoming holiday season\, you can learn how to make a beautiful\, mystifying end-grain cutting board. \n3D Cutting Board with Alex Snodgrass\nThis hands-on class begins by teaching you how to tune a bandsaw to make perfect cuts. Once learned\, this skill makes future bandsaw use a breeze. You will then progress through the techniques required to make the cutting board: how to make dead-on straight cuts on the bandsaw\, how to make accurate angled cuts on the bandsaw\, and how to plane\, sand\, glue\, and clamp the cutting board. \nUsing only three woods\, walnut\, cherry\, and maple\, you’ll work under Alex’s direction to make a beautiful and functional cutting board that you’ll take home. More importantly\, you’ll go home with the knowledge and experience to be able to set up a bandsaw to make accurate cuts regardless of what you’re making. Oh\, and you’ll be able to easily repeat the construction process to make enough 3D cutting boards for all your friends and family.
URL:https://acanthus.com/event/3d-cutting-board-with-alex-snodgrass-2-2-2021-04-25-2/2021-08-21/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2019/07/Snodgrass_3d_cuttingboards.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20210822T090000
DTEND;TZID=America/New_York:20210822T163000
DTSTAMP:20260409T175817
CREATED:20210102T125622Z
LAST-MODIFIED:20210811T160119Z
UID:10000513-1629622800-1629649800@acanthus.com
SUMMARY:3D Cutting Board With Alex Snodgrass –  Hands-on Class
DESCRIPTION:Make a 3D Cutting Board with Alex Snodgrass here in the Acanthus Workshop. Just in time for the upcoming holiday season\, you can learn how to make a beautiful\, mystifying end-grain cutting board. \n3D Cutting Board with Alex Snodgrass\nThis hands-on class begins by teaching you how to tune a bandsaw to make perfect cuts. Once learned\, this skill makes future bandsaw use a breeze. You will then progress through the techniques required to make the cutting board: how to make dead-on straight cuts on the bandsaw\, how to make accurate angled cuts on the bandsaw\, and how to plane\, sand\, glue\, and clamp the cutting board. \nUsing only three woods\, walnut\, cherry\, and maple\, you’ll work under Alex’s direction to make a beautiful and functional cutting board that you’ll take home. More importantly\, you’ll go home with the knowledge and experience to be able to set up a bandsaw to make accurate cuts regardless of what you’re making. Oh\, and you’ll be able to easily repeat the construction process to make enough 3D cutting boards for all your friends and family.
URL:https://acanthus.com/event/3d-cutting-board-with-alex-snodgrass-2-2-2021-04-25-2/2021-08-22/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2019/07/Snodgrass_3d_cuttingboards.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20210823T090000
DTEND;TZID=America/New_York:20210823T163000
DTSTAMP:20260409T175817
CREATED:20210811T160017Z
LAST-MODIFIED:20210811T160017Z
UID:10000508-1629709200-1629736200@acanthus.com
SUMMARY:Make Table Saw Jigs & Fixtures with Bob Van Dyke
DESCRIPTION:The idea of making jigs and fixtures for the table saw is always one that creates a lot of debate. Some people insist that they are not worth it and “just do it by hand\,” while other people love coming up with intricate fixtures that do a specific job really well. Bob’s approach is somewhere in the middle- will the jig be useful enough to be used over & over again\, and is it better than one that is easily purchased? \nThis class is NOT a beginning table saw class. Participants must have some working experience with table saws & routers. \nNote: Because of the jigs designs\, you must have a table saw with a Biessemeyer-type fence. Bench-top or “Job-site” saws will not work with these jigs. Please specify the table saw make and model you have when registering for this class. If you have any questions\, please contact Bob Van Dyke directly. \nIn this hands-on class\, participants make several different jigs & fixtures for their table saw\, all of which become staple tools in their shop. \nEveryone goes home with several essential jigs for their table saw!
URL:https://acanthus.com/event/make-table-saw-jigs-fixtures-with-bob-van-dyke/2021-08-23/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20210824T090000
DTEND;TZID=America/New_York:20210824T163000
DTSTAMP:20260409T175817
CREATED:20210811T160017Z
LAST-MODIFIED:20210811T160017Z
UID:10000509-1629795600-1629822600@acanthus.com
SUMMARY:Make Table Saw Jigs & Fixtures with Bob Van Dyke
DESCRIPTION:The idea of making jigs and fixtures for the table saw is always one that creates a lot of debate. Some people insist that they are not worth it and “just do it by hand\,” while other people love coming up with intricate fixtures that do a specific job really well. Bob’s approach is somewhere in the middle- will the jig be useful enough to be used over & over again\, and is it better than one that is easily purchased? \nThis class is NOT a beginning table saw class. Participants must have some working experience with table saws & routers. \nNote: Because of the jigs designs\, you must have a table saw with a Biessemeyer-type fence. Bench-top or “Job-site” saws will not work with these jigs. Please specify the table saw make and model you have when registering for this class. If you have any questions\, please contact Bob Van Dyke directly. \nIn this hands-on class\, participants make several different jigs & fixtures for their table saw\, all of which become staple tools in their shop. \nEveryone goes home with several essential jigs for their table saw!
URL:https://acanthus.com/event/make-table-saw-jigs-fixtures-with-bob-van-dyke/2021-08-24/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20210825T090000
DTEND;TZID=America/New_York:20210825T163000
DTSTAMP:20260409T175817
CREATED:20210811T160017Z
LAST-MODIFIED:20210811T160017Z
UID:10000510-1629882000-1629909000@acanthus.com
SUMMARY:Make Table Saw Jigs & Fixtures with Bob Van Dyke
DESCRIPTION:The idea of making jigs and fixtures for the table saw is always one that creates a lot of debate. Some people insist that they are not worth it and “just do it by hand\,” while other people love coming up with intricate fixtures that do a specific job really well. Bob’s approach is somewhere in the middle- will the jig be useful enough to be used over & over again\, and is it better than one that is easily purchased? \nThis class is NOT a beginning table saw class. Participants must have some working experience with table saws & routers. \nNote: Because of the jigs designs\, you must have a table saw with a Biessemeyer-type fence. Bench-top or “Job-site” saws will not work with these jigs. Please specify the table saw make and model you have when registering for this class. If you have any questions\, please contact Bob Van Dyke directly. \nIn this hands-on class\, participants make several different jigs & fixtures for their table saw\, all of which become staple tools in their shop. \nEveryone goes home with several essential jigs for their table saw!
URL:https://acanthus.com/event/make-table-saw-jigs-fixtures-with-bob-van-dyke/2021-08-25/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20210826T090000
DTEND;TZID=America/New_York:20210826T163000
DTSTAMP:20260409T175817
CREATED:20210811T160017Z
LAST-MODIFIED:20210811T160017Z
UID:10000511-1629968400-1629995400@acanthus.com
SUMMARY:Make Table Saw Jigs & Fixtures with Bob Van Dyke
DESCRIPTION:The idea of making jigs and fixtures for the table saw is always one that creates a lot of debate. Some people insist that they are not worth it and “just do it by hand\,” while other people love coming up with intricate fixtures that do a specific job really well. Bob’s approach is somewhere in the middle- will the jig be useful enough to be used over & over again\, and is it better than one that is easily purchased? \nThis class is NOT a beginning table saw class. Participants must have some working experience with table saws & routers. \nNote: Because of the jigs designs\, you must have a table saw with a Biessemeyer-type fence. Bench-top or “Job-site” saws will not work with these jigs. Please specify the table saw make and model you have when registering for this class. If you have any questions\, please contact Bob Van Dyke directly. \nIn this hands-on class\, participants make several different jigs & fixtures for their table saw\, all of which become staple tools in their shop. \nEveryone goes home with several essential jigs for their table saw!
URL:https://acanthus.com/event/make-table-saw-jigs-fixtures-with-bob-van-dyke/2021-08-26/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
END:VCALENDAR