BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Chuck Bender - Woodworking - ECPv6.15.18//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://acanthus.com
X-WR-CALDESC:Events for Chuck Bender - Woodworking
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20210314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20211107T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20220313T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20221106T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20230312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20231105T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20220923T083000
DTEND;TZID=America/New_York:20220923T163000
DTSTAMP:20260424T073140
CREATED:20211117T161400Z
LAST-MODIFIED:20211117T161400Z
UID:10000544-1663921800-1663950600@acanthus.com
SUMMARY:Connecticut Flat Top Highboy - Hands-on Class Week 2
DESCRIPTION:To many woodworkers\, the highboy (or tall chest) represents the pinnacle of furniture making. This is your chance to reach that summit. Join me for this 2-week class and build something extraordinary – a Connecticut-inspired Flat-top Highboy. \nFlat-top Highboy\nYou’ll start the first week of the class at the top. That’s right\, the upper case is where the project begins. We’ll dovetail the case\, make and fit the fluted quarter columns\, and even make the generous crown molding. Dovetailing and fitting the drawers is your homework before the next session. \nWeek two begins with lower-case construction. We’ll jump into making pad-footed cabriole legs\, then roll through the mortise-and-tenon construction. The week finishes off with a bit of carving.
URL:https://acanthus.com/event/connecticut-flat-top-highboy-hands-on-class-2022-06-17/2022-09-23/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2021/10/Chapin_style_highboy_Section.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20221010T090000
DTEND;TZID=America/New_York:20221010T163000
DTSTAMP:20260424T073140
CREATED:20211123T220542Z
LAST-MODIFIED:20211123T220542Z
UID:10000360-1665392400-1665419400@acanthus.com
SUMMARY:Build a Frothingham Lowboy
DESCRIPTION:The Benjamin Frothingham Lowboy class is the perfect skill builder for any intermediate or advanced woodworker. In the 18th century\, the lowboy (or dressing table) was an essential piece of furniture in any fashionable home. Today\, the form remains among the most desirable amongst antique collectors. \nFrothingham Lowboy\nThe 5-day Frothingham Lowboy class begins with a full-scale drawing to include the design elements you find most appealing.  You’ll then jump right into making the pad-foot cabriole legs. And by the end of the week\, you’ll be carving the central fan that is sure to be the focal point of your lowboy.
URL:https://acanthus.com/event/build-a-frothingham-lowboy/2022-10-10/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/png:https://acanthus.com/wp-content/uploads/2021/11/Screen-Shot-2021-11-19-at-6.43.43-AM.png
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20221011T090000
DTEND;TZID=America/New_York:20221011T163000
DTSTAMP:20260424T073140
CREATED:20211123T220542Z
LAST-MODIFIED:20211123T220542Z
UID:10000361-1665478800-1665505800@acanthus.com
SUMMARY:Build a Frothingham Lowboy
DESCRIPTION:The Benjamin Frothingham Lowboy class is the perfect skill builder for any intermediate or advanced woodworker. In the 18th century\, the lowboy (or dressing table) was an essential piece of furniture in any fashionable home. Today\, the form remains among the most desirable amongst antique collectors. \nFrothingham Lowboy\nThe 5-day Frothingham Lowboy class begins with a full-scale drawing to include the design elements you find most appealing.  You’ll then jump right into making the pad-foot cabriole legs. And by the end of the week\, you’ll be carving the central fan that is sure to be the focal point of your lowboy.
URL:https://acanthus.com/event/build-a-frothingham-lowboy/2022-10-11/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/png:https://acanthus.com/wp-content/uploads/2021/11/Screen-Shot-2021-11-19-at-6.43.43-AM.png
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20221012T090000
DTEND;TZID=America/New_York:20221012T163000
DTSTAMP:20260424T073140
CREATED:20211123T220542Z
LAST-MODIFIED:20211123T220542Z
UID:10000362-1665565200-1665592200@acanthus.com
SUMMARY:Build a Frothingham Lowboy
DESCRIPTION:The Benjamin Frothingham Lowboy class is the perfect skill builder for any intermediate or advanced woodworker. In the 18th century\, the lowboy (or dressing table) was an essential piece of furniture in any fashionable home. Today\, the form remains among the most desirable amongst antique collectors. \nFrothingham Lowboy\nThe 5-day Frothingham Lowboy class begins with a full-scale drawing to include the design elements you find most appealing.  You’ll then jump right into making the pad-foot cabriole legs. And by the end of the week\, you’ll be carving the central fan that is sure to be the focal point of your lowboy.
URL:https://acanthus.com/event/build-a-frothingham-lowboy/2022-10-12/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/png:https://acanthus.com/wp-content/uploads/2021/11/Screen-Shot-2021-11-19-at-6.43.43-AM.png
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20221013T090000
DTEND;TZID=America/New_York:20221013T163000
DTSTAMP:20260424T073140
CREATED:20211123T220542Z
LAST-MODIFIED:20211123T220542Z
UID:10000363-1665651600-1665678600@acanthus.com
SUMMARY:Build a Frothingham Lowboy
DESCRIPTION:The Benjamin Frothingham Lowboy class is the perfect skill builder for any intermediate or advanced woodworker. In the 18th century\, the lowboy (or dressing table) was an essential piece of furniture in any fashionable home. Today\, the form remains among the most desirable amongst antique collectors. \nFrothingham Lowboy\nThe 5-day Frothingham Lowboy class begins with a full-scale drawing to include the design elements you find most appealing.  You’ll then jump right into making the pad-foot cabriole legs. And by the end of the week\, you’ll be carving the central fan that is sure to be the focal point of your lowboy.
URL:https://acanthus.com/event/build-a-frothingham-lowboy/2022-10-13/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/png:https://acanthus.com/wp-content/uploads/2021/11/Screen-Shot-2021-11-19-at-6.43.43-AM.png
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20221014T090000
DTEND;TZID=America/New_York:20221014T163000
DTSTAMP:20260424T073140
CREATED:20211123T220542Z
LAST-MODIFIED:20211123T220542Z
UID:10000364-1665738000-1665765000@acanthus.com
SUMMARY:Build a Frothingham Lowboy
DESCRIPTION:The Benjamin Frothingham Lowboy class is the perfect skill builder for any intermediate or advanced woodworker. In the 18th century\, the lowboy (or dressing table) was an essential piece of furniture in any fashionable home. Today\, the form remains among the most desirable amongst antique collectors. \nFrothingham Lowboy\nThe 5-day Frothingham Lowboy class begins with a full-scale drawing to include the design elements you find most appealing.  You’ll then jump right into making the pad-foot cabriole legs. And by the end of the week\, you’ll be carving the central fan that is sure to be the focal point of your lowboy.
URL:https://acanthus.com/event/build-a-frothingham-lowboy/2022-10-14/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/png:https://acanthus.com/wp-content/uploads/2021/11/Screen-Shot-2021-11-19-at-6.43.43-AM.png
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20221114T090000
DTEND;TZID=America/New_York:20221114T163000
DTSTAMP:20260424T073140
CREATED:20211214T201142Z
LAST-MODIFIED:20211214T201142Z
UID:10000373-1668416400-1668443400@acanthus.com
SUMMARY:Make a Pie Crust Table – Hands-on Class
DESCRIPTION:Appealing to the carver in many woodworkers\, the pie crust table epitomizes the mastery of craftsmanship. In this week-long class\, you’ll make your own version of one of the most elegant pie crust tables in existence. \n  \n  \nPie Crust Table\nWhile the original upon which this adaptation is modeled is approximately 24″ in diameter and 28″ tall\, your project can be altered to suit your needs. If you want to make the top 36″ in diameter\, we’ll scale the project to match. If you want to carve acanthus leaf instead of shells on the knees\, then that’s what you’ll do. The beauty of making a project of this kind in such a small class is room for customization.
URL:https://acanthus.com/event/make-a-pie-crust-table-hands-on-class-2/2022-11-14/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2020/11/TM_Piecrust_Half_Top.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20221115T090000
DTEND;TZID=America/New_York:20221115T163000
DTSTAMP:20260424T073140
CREATED:20211214T201142Z
LAST-MODIFIED:20211214T201142Z
UID:10000374-1668502800-1668529800@acanthus.com
SUMMARY:Make a Pie Crust Table – Hands-on Class
DESCRIPTION:Appealing to the carver in many woodworkers\, the pie crust table epitomizes the mastery of craftsmanship. In this week-long class\, you’ll make your own version of one of the most elegant pie crust tables in existence. \n  \n  \nPie Crust Table\nWhile the original upon which this adaptation is modeled is approximately 24″ in diameter and 28″ tall\, your project can be altered to suit your needs. If you want to make the top 36″ in diameter\, we’ll scale the project to match. If you want to carve acanthus leaf instead of shells on the knees\, then that’s what you’ll do. The beauty of making a project of this kind in such a small class is room for customization.
URL:https://acanthus.com/event/make-a-pie-crust-table-hands-on-class-2/2022-11-15/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2020/11/TM_Piecrust_Half_Top.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20221116T090000
DTEND;TZID=America/New_York:20221116T163000
DTSTAMP:20260424T073140
CREATED:20211214T201142Z
LAST-MODIFIED:20211214T201142Z
UID:10000375-1668589200-1668616200@acanthus.com
SUMMARY:Make a Pie Crust Table – Hands-on Class
DESCRIPTION:Appealing to the carver in many woodworkers\, the pie crust table epitomizes the mastery of craftsmanship. In this week-long class\, you’ll make your own version of one of the most elegant pie crust tables in existence. \n  \n  \nPie Crust Table\nWhile the original upon which this adaptation is modeled is approximately 24″ in diameter and 28″ tall\, your project can be altered to suit your needs. If you want to make the top 36″ in diameter\, we’ll scale the project to match. If you want to carve acanthus leaf instead of shells on the knees\, then that’s what you’ll do. The beauty of making a project of this kind in such a small class is room for customization.
URL:https://acanthus.com/event/make-a-pie-crust-table-hands-on-class-2/2022-11-16/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2020/11/TM_Piecrust_Half_Top.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20221117T090000
DTEND;TZID=America/New_York:20221117T163000
DTSTAMP:20260424T073140
CREATED:20211214T201142Z
LAST-MODIFIED:20211214T201142Z
UID:10000376-1668675600-1668702600@acanthus.com
SUMMARY:Make a Pie Crust Table – Hands-on Class
DESCRIPTION:Appealing to the carver in many woodworkers\, the pie crust table epitomizes the mastery of craftsmanship. In this week-long class\, you’ll make your own version of one of the most elegant pie crust tables in existence. \n  \n  \nPie Crust Table\nWhile the original upon which this adaptation is modeled is approximately 24″ in diameter and 28″ tall\, your project can be altered to suit your needs. If you want to make the top 36″ in diameter\, we’ll scale the project to match. If you want to carve acanthus leaf instead of shells on the knees\, then that’s what you’ll do. The beauty of making a project of this kind in such a small class is room for customization.
URL:https://acanthus.com/event/make-a-pie-crust-table-hands-on-class-2/2022-11-17/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2020/11/TM_Piecrust_Half_Top.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20221118T090000
DTEND;TZID=America/New_York:20221118T163000
DTSTAMP:20260424T073140
CREATED:20211214T201142Z
LAST-MODIFIED:20211214T201142Z
UID:10000377-1668762000-1668789000@acanthus.com
SUMMARY:Make a Pie Crust Table – Hands-on Class
DESCRIPTION:Appealing to the carver in many woodworkers\, the pie crust table epitomizes the mastery of craftsmanship. In this week-long class\, you’ll make your own version of one of the most elegant pie crust tables in existence. \n  \n  \nPie Crust Table\nWhile the original upon which this adaptation is modeled is approximately 24″ in diameter and 28″ tall\, your project can be altered to suit your needs. If you want to make the top 36″ in diameter\, we’ll scale the project to match. If you want to carve acanthus leaf instead of shells on the knees\, then that’s what you’ll do. The beauty of making a project of this kind in such a small class is room for customization.
URL:https://acanthus.com/event/make-a-pie-crust-table-hands-on-class-2/2022-11-18/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2020/11/TM_Piecrust_Half_Top.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230501T090000
DTEND;TZID=America/New_York:20230501T163000
DTSTAMP:20260424T073140
CREATED:20221217T184304Z
LAST-MODIFIED:20221217T184304Z
UID:10001203-1682931600-1682958600@acanthus.com
SUMMARY:Make Table Saw Jigs & Fixtures with Bob Van Dyke
DESCRIPTION:The idea of making jigs and fixtures for the table saw is always one that creates a lot of debate. Some people insist that they are not worth it and “just do it by hand\,” while other people love coming up with intricate fixtures that do a specific job really well. Bob’s approach is somewhere in the middle- will the jig be useful enough to be used over & over again\, and is it better than one that is easily purchased? \nThis class is NOT a beginning table saw class. Participants must have some working experience with table saws & routers. \nNote: Because of the jigs designs\, you must have a table saw with a Biessemeyer-type fence. Bench-top or “Job-site” saws will not work with these jigs. Please specify the table saw make and model you have when registering for this class. If you have any questions\, please contact Bob Van Dyke directly. \nIn this hands-on class\, participants make several different jigs & fixtures for their table saw\, all of which become staple tools in their shop. \nEveryone goes home with several essential jigs for their table saw!
URL:https://acanthus.com/event/make-table-saw-jigs-fixtures-with-bob-van-dyke-2/2023-05-01/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230502T090000
DTEND;TZID=America/New_York:20230502T163000
DTSTAMP:20260424T073140
CREATED:20221217T184304Z
LAST-MODIFIED:20221217T184304Z
UID:10001204-1683018000-1683045000@acanthus.com
SUMMARY:Make Table Saw Jigs & Fixtures with Bob Van Dyke
DESCRIPTION:The idea of making jigs and fixtures for the table saw is always one that creates a lot of debate. Some people insist that they are not worth it and “just do it by hand\,” while other people love coming up with intricate fixtures that do a specific job really well. Bob’s approach is somewhere in the middle- will the jig be useful enough to be used over & over again\, and is it better than one that is easily purchased? \nThis class is NOT a beginning table saw class. Participants must have some working experience with table saws & routers. \nNote: Because of the jigs designs\, you must have a table saw with a Biessemeyer-type fence. Bench-top or “Job-site” saws will not work with these jigs. Please specify the table saw make and model you have when registering for this class. If you have any questions\, please contact Bob Van Dyke directly. \nIn this hands-on class\, participants make several different jigs & fixtures for their table saw\, all of which become staple tools in their shop. \nEveryone goes home with several essential jigs for their table saw!
URL:https://acanthus.com/event/make-table-saw-jigs-fixtures-with-bob-van-dyke-2/2023-05-02/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230503T090000
DTEND;TZID=America/New_York:20230503T163000
DTSTAMP:20260424T073140
CREATED:20221217T184304Z
LAST-MODIFIED:20221217T184304Z
UID:10001205-1683104400-1683131400@acanthus.com
SUMMARY:Make Table Saw Jigs & Fixtures with Bob Van Dyke
DESCRIPTION:The idea of making jigs and fixtures for the table saw is always one that creates a lot of debate. Some people insist that they are not worth it and “just do it by hand\,” while other people love coming up with intricate fixtures that do a specific job really well. Bob’s approach is somewhere in the middle- will the jig be useful enough to be used over & over again\, and is it better than one that is easily purchased? \nThis class is NOT a beginning table saw class. Participants must have some working experience with table saws & routers. \nNote: Because of the jigs designs\, you must have a table saw with a Biessemeyer-type fence. Bench-top or “Job-site” saws will not work with these jigs. Please specify the table saw make and model you have when registering for this class. If you have any questions\, please contact Bob Van Dyke directly. \nIn this hands-on class\, participants make several different jigs & fixtures for their table saw\, all of which become staple tools in their shop. \nEveryone goes home with several essential jigs for their table saw!
URL:https://acanthus.com/event/make-table-saw-jigs-fixtures-with-bob-van-dyke-2/2023-05-03/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230504T090000
DTEND;TZID=America/New_York:20230504T163000
DTSTAMP:20260424T073140
CREATED:20221217T184304Z
LAST-MODIFIED:20221217T184304Z
UID:10001206-1683190800-1683217800@acanthus.com
SUMMARY:Make Table Saw Jigs & Fixtures with Bob Van Dyke
DESCRIPTION:The idea of making jigs and fixtures for the table saw is always one that creates a lot of debate. Some people insist that they are not worth it and “just do it by hand\,” while other people love coming up with intricate fixtures that do a specific job really well. Bob’s approach is somewhere in the middle- will the jig be useful enough to be used over & over again\, and is it better than one that is easily purchased? \nThis class is NOT a beginning table saw class. Participants must have some working experience with table saws & routers. \nNote: Because of the jigs designs\, you must have a table saw with a Biessemeyer-type fence. Bench-top or “Job-site” saws will not work with these jigs. Please specify the table saw make and model you have when registering for this class. If you have any questions\, please contact Bob Van Dyke directly. \nIn this hands-on class\, participants make several different jigs & fixtures for their table saw\, all of which become staple tools in their shop. \nEveryone goes home with several essential jigs for their table saw!
URL:https://acanthus.com/event/make-table-saw-jigs-fixtures-with-bob-van-dyke-2/2023-05-04/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230505T090000
DTEND;TZID=America/New_York:20230505T163000
DTSTAMP:20260424T073140
CREATED:20221217T184304Z
LAST-MODIFIED:20221217T184304Z
UID:10001207-1683277200-1683304200@acanthus.com
SUMMARY:Make Table Saw Jigs & Fixtures with Bob Van Dyke
DESCRIPTION:The idea of making jigs and fixtures for the table saw is always one that creates a lot of debate. Some people insist that they are not worth it and “just do it by hand\,” while other people love coming up with intricate fixtures that do a specific job really well. Bob’s approach is somewhere in the middle- will the jig be useful enough to be used over & over again\, and is it better than one that is easily purchased? \nThis class is NOT a beginning table saw class. Participants must have some working experience with table saws & routers. \nNote: Because of the jigs designs\, you must have a table saw with a Biessemeyer-type fence. Bench-top or “Job-site” saws will not work with these jigs. Please specify the table saw make and model you have when registering for this class. If you have any questions\, please contact Bob Van Dyke directly. \nIn this hands-on class\, participants make several different jigs & fixtures for their table saw\, all of which become staple tools in their shop. \nEveryone goes home with several essential jigs for their table saw!
URL:https://acanthus.com/event/make-table-saw-jigs-fixtures-with-bob-van-dyke-2/2023-05-05/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230508T090000
DTEND;TZID=America/New_York:20230508T163000
DTSTAMP:20260424T073140
CREATED:20221217T184713Z
LAST-MODIFIED:20221217T185634Z
UID:10001213-1683536400-1683563400@acanthus.com
SUMMARY:Chippendale Arm Chair – Hands-on Class
DESCRIPTION:The ultimate test of your woodworking skills – the Chippendale chair. The angled rear legs and trapezoidal seat come together with compound angled mortise-and-tenon joints. And to really kick this project up\, we’re adding arms.
URL:https://acanthus.com/event/chippendale-arm-chair-hands-on-class/2023-05-08/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2022/11/Chippendale_Ribbon_Back_corrected.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230509T090000
DTEND;TZID=America/New_York:20230509T163000
DTSTAMP:20260424T073140
CREATED:20221217T184713Z
LAST-MODIFIED:20221217T185634Z
UID:10001214-1683622800-1683649800@acanthus.com
SUMMARY:Chippendale Arm Chair – Hands-on Class
DESCRIPTION:The ultimate test of your woodworking skills – the Chippendale chair. The angled rear legs and trapezoidal seat come together with compound angled mortise-and-tenon joints. And to really kick this project up\, we’re adding arms.
URL:https://acanthus.com/event/chippendale-arm-chair-hands-on-class/2023-05-09/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2022/11/Chippendale_Ribbon_Back_corrected.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230510T090000
DTEND;TZID=America/New_York:20230510T163000
DTSTAMP:20260424T073140
CREATED:20221217T184713Z
LAST-MODIFIED:20221217T185634Z
UID:10001215-1683709200-1683736200@acanthus.com
SUMMARY:Chippendale Arm Chair – Hands-on Class
DESCRIPTION:The ultimate test of your woodworking skills – the Chippendale chair. The angled rear legs and trapezoidal seat come together with compound angled mortise-and-tenon joints. And to really kick this project up\, we’re adding arms.
URL:https://acanthus.com/event/chippendale-arm-chair-hands-on-class/2023-05-10/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2022/11/Chippendale_Ribbon_Back_corrected.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230511T090000
DTEND;TZID=America/New_York:20230511T163000
DTSTAMP:20260424T073140
CREATED:20221217T184713Z
LAST-MODIFIED:20221217T185634Z
UID:10001216-1683795600-1683822600@acanthus.com
SUMMARY:Chippendale Arm Chair – Hands-on Class
DESCRIPTION:The ultimate test of your woodworking skills – the Chippendale chair. The angled rear legs and trapezoidal seat come together with compound angled mortise-and-tenon joints. And to really kick this project up\, we’re adding arms.
URL:https://acanthus.com/event/chippendale-arm-chair-hands-on-class/2023-05-11/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2022/11/Chippendale_Ribbon_Back_corrected.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230512T090000
DTEND;TZID=America/New_York:20230512T163000
DTSTAMP:20260424T073140
CREATED:20221217T184713Z
LAST-MODIFIED:20221217T185634Z
UID:10001217-1683882000-1683909000@acanthus.com
SUMMARY:Chippendale Arm Chair – Hands-on Class
DESCRIPTION:The ultimate test of your woodworking skills – the Chippendale chair. The angled rear legs and trapezoidal seat come together with compound angled mortise-and-tenon joints. And to really kick this project up\, we’re adding arms.
URL:https://acanthus.com/event/chippendale-arm-chair-hands-on-class/2023-05-12/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2022/11/Chippendale_Ribbon_Back_corrected.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230522T090000
DTEND;TZID=America/New_York:20230522T163000
DTSTAMP:20260424T073140
CREATED:20221217T185454Z
LAST-MODIFIED:20221219T133437Z
UID:10001223-1684746000-1684773000@acanthus.com
SUMMARY:Modern Display Cabinet – Hands-on Class
DESCRIPTION:The Build a Modern Display Cabinet class takes inspiration from George Walton’s iconic Holland Cabinet\, which takes its name from his Holland Street residence. George designed this cabinet after being inspired by shop facades in London.
URL:https://acanthus.com/event/modern-display-cabinet-hands-on-class/2023-05-22/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2022/12/george_walton_holland_cabinet-scaled.jpeg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230523T090000
DTEND;TZID=America/New_York:20230523T163000
DTSTAMP:20260424T073140
CREATED:20221217T185454Z
LAST-MODIFIED:20221219T133437Z
UID:10001224-1684832400-1684859400@acanthus.com
SUMMARY:Modern Display Cabinet – Hands-on Class
DESCRIPTION:The Build a Modern Display Cabinet class takes inspiration from George Walton’s iconic Holland Cabinet\, which takes its name from his Holland Street residence. George designed this cabinet after being inspired by shop facades in London.
URL:https://acanthus.com/event/modern-display-cabinet-hands-on-class/2023-05-23/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2022/12/george_walton_holland_cabinet-scaled.jpeg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230524T090000
DTEND;TZID=America/New_York:20230524T163000
DTSTAMP:20260424T073140
CREATED:20221217T185454Z
LAST-MODIFIED:20221219T133437Z
UID:10001225-1684918800-1684945800@acanthus.com
SUMMARY:Modern Display Cabinet – Hands-on Class
DESCRIPTION:The Build a Modern Display Cabinet class takes inspiration from George Walton’s iconic Holland Cabinet\, which takes its name from his Holland Street residence. George designed this cabinet after being inspired by shop facades in London.
URL:https://acanthus.com/event/modern-display-cabinet-hands-on-class/2023-05-24/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2022/12/george_walton_holland_cabinet-scaled.jpeg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230525T090000
DTEND;TZID=America/New_York:20230525T163000
DTSTAMP:20260424T073140
CREATED:20221217T185454Z
LAST-MODIFIED:20221219T133437Z
UID:10001226-1685005200-1685032200@acanthus.com
SUMMARY:Modern Display Cabinet – Hands-on Class
DESCRIPTION:The Build a Modern Display Cabinet class takes inspiration from George Walton’s iconic Holland Cabinet\, which takes its name from his Holland Street residence. George designed this cabinet after being inspired by shop facades in London.
URL:https://acanthus.com/event/modern-display-cabinet-hands-on-class/2023-05-25/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2022/12/george_walton_holland_cabinet-scaled.jpeg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230526T090000
DTEND;TZID=America/New_York:20230526T163000
DTSTAMP:20260424T073140
CREATED:20221217T185454Z
LAST-MODIFIED:20221219T133437Z
UID:10001227-1685091600-1685118600@acanthus.com
SUMMARY:Modern Display Cabinet – Hands-on Class
DESCRIPTION:The Build a Modern Display Cabinet class takes inspiration from George Walton’s iconic Holland Cabinet\, which takes its name from his Holland Street residence. George designed this cabinet after being inspired by shop facades in London.
URL:https://acanthus.com/event/modern-display-cabinet-hands-on-class/2023-05-26/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2022/12/george_walton_holland_cabinet-scaled.jpeg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230619T090000
DTEND;TZID=America/New_York:20230619T163000
DTSTAMP:20260424T073140
CREATED:20221217T185909Z
LAST-MODIFIED:20221217T185909Z
UID:10001233-1687165200-1687192200@acanthus.com
SUMMARY:Newport Corner Chair – Hands-on Class
DESCRIPTION:The Newport corner chair often called a roundabout chair\, is a project that will challenge even the most experienced woodworker. From its pierced back splats to the elegant ball and claw feet\, every aspect of this project speaks of its elegance and sophistication.
URL:https://acanthus.com/event/newport-corner-chair-hands-on-class/2023-06-19/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2022/12/Newport_Corner_Chair.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230620T090000
DTEND;TZID=America/New_York:20230620T163000
DTSTAMP:20260424T073140
CREATED:20221217T185909Z
LAST-MODIFIED:20221217T185909Z
UID:10001234-1687251600-1687278600@acanthus.com
SUMMARY:Newport Corner Chair – Hands-on Class
DESCRIPTION:The Newport corner chair often called a roundabout chair\, is a project that will challenge even the most experienced woodworker. From its pierced back splats to the elegant ball and claw feet\, every aspect of this project speaks of its elegance and sophistication.
URL:https://acanthus.com/event/newport-corner-chair-hands-on-class/2023-06-20/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2022/12/Newport_Corner_Chair.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230621T090000
DTEND;TZID=America/New_York:20230621T163000
DTSTAMP:20260424T073140
CREATED:20221217T185909Z
LAST-MODIFIED:20221217T185909Z
UID:10001235-1687338000-1687365000@acanthus.com
SUMMARY:Newport Corner Chair – Hands-on Class
DESCRIPTION:The Newport corner chair often called a roundabout chair\, is a project that will challenge even the most experienced woodworker. From its pierced back splats to the elegant ball and claw feet\, every aspect of this project speaks of its elegance and sophistication.
URL:https://acanthus.com/event/newport-corner-chair-hands-on-class/2023-06-21/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2022/12/Newport_Corner_Chair.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230622T090000
DTEND;TZID=America/New_York:20230622T163000
DTSTAMP:20260424T073140
CREATED:20221217T185909Z
LAST-MODIFIED:20221217T185909Z
UID:10001236-1687424400-1687451400@acanthus.com
SUMMARY:Newport Corner Chair – Hands-on Class
DESCRIPTION:The Newport corner chair often called a roundabout chair\, is a project that will challenge even the most experienced woodworker. From its pierced back splats to the elegant ball and claw feet\, every aspect of this project speaks of its elegance and sophistication.
URL:https://acanthus.com/event/newport-corner-chair-hands-on-class/2023-06-22/
LOCATION:Acanthus Workshop\, 62 Indian Trail Rd.\, Jim Thorpe\, PA\, 18229\, United States
CATEGORIES:Hands-on Class
ATTACH;FMTTYPE=image/jpeg:https://acanthus.com/wp-content/uploads/2022/12/Newport_Corner_Chair.jpg
ORGANIZER;CN="Acanthus Workshop":MAILTO:classes@acanthus.com
GEO:40.211701;-75.621274
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Acanthus Workshop 62 Indian Trail Rd. Jim Thorpe PA 18229 United States;X-APPLE-RADIUS=500;X-TITLE=62 Indian Trail Rd.:geo:-75.621274,40.211701
END:VEVENT
END:VCALENDAR